After this action, the trays will protrude from the body forward 6.5 cm (in case of A4). However, their design provides for different scenarios for working with paper. The Canon Maxify MB5340 upper tray can be left pushed into the housing. Then the protruding part of the lower tray will not be open from above, which will quickly add office paper to it, although it will remain unprotected from dust.
If you move both trays, the upper one completely closes the lower one, and it will be protected by means of a retractable curtain part, which is also an integral part of the receiving tray. Feeding cassettes can be moved either to the position where they hold A4 and Letter paper, or in a position to use such paper as Legal. If both trays are occupied by the same type of paper, you can set the automatic transition to the second cassette in the settings when the first one is empty.
Maxify MB5340 Driver Printer Download
The receiving tray is a low niche with a width slightly more than A4 sheet. At its base is the aforementioned curtain. In addition to the retractable section, it is equipped with a folding bar-stop, not allowing prints to fall to the floor. The front of this Canon Maxify MB5340 above the trays occupies the cover, which opens access to the printing mechanism for replacing the cartridges. The corresponding position of the carriage takes only when the ink runs out in at least one of them. To the left of the input trays is a USB port for connecting flash drives.
The top of the Canon Maxify MB5340 is crowned with a massive cover of the scanner unit. It has beveled edges, over which the product can easily be recognized at a distance under the Canon brand. On the front sloping face, in a shallow niche, is a control panel. For a full-featured MFP, it's unusually few buttons - only six. But the fact is that the device is equipped with a color LCD touchscreen, and most buttons (for example, for dialing an e-mail address, document name or phone number) are screen ones, i. E. virtual.
In the cover of the flatbed scanner there is an additional color document scanner with two CIS-sensors that provide single-pass two-sided scanning of documents. Moreover, thanks to the automatic document feeder, up to 50 sheets can be digitized (including from two sides) at one time and this is how much the receiving tray holds. In the non-working position of the ADF, part of its tray is transformed into a flat cover protecting the receiving path from dust and foreign objects.